朱翻译
我译的《冷锻斜齿轮卸压孔设计与模具弹性变形控制工艺指南》（七）Process Guideline for Relief‑Hole Design and Die Elastic Deformation Control in Cold Forging of Helical Gears原文：综合上述分析，建议在冷锻斜齿轮模具设计中引入多直径卸压孔结构，并结合有限元仿真结果进行迭代优化，以实现锻造载荷、模具寿命与齿形精度之间的最佳平衡。译文：Based on the foregoing analysis, it is recommended that the die design for cold-forged helical gears incorporate multi‑diameter relief holes, with iterative optimization conducted in conjunction with finite element simulation results, so as to achieve an optimal balance among forging load, die service life, and tooth profile accuracy.（完）
发布于 江苏
分享
评论
赞
未登录
友善发言
评论
加载中
